بسته پتروفیزیکی IP 4.6 محصول 2019 جهت استفاده کاربران عادی و متخصصان پتروفیزیک توسط شرکت Senergyتوسعه یافته است. نرم افزارInteractive Petrophysicsکه به مختصر به آن IPگفته می شود توسط پتروفیزیستهای ماهر با نگاهی به فعالیتهای پتروفیزیست ها و خواسته های آنها طراحی شده است. IPیک نرم افزار سریع، دقیق، قابل حمل، با طراحی متفاوت و با کاربردی آسان برای زمین شناسان و پتورفیزیستها می باشد. زمین شناسان می توانند با بررسی سریع نمودارهای پتروفیزیکی و با استفاده از تجربیات پتروفیزیستان ، زون های مورد نظر خود را جدا کنند.

 بررسی نرم افزار Interactive Petrophysics 4.6:

IP 2019 Enhancements

· Saturation Height - Several enhancements have been added to the Saturation Height workflow:

· Several different methods of Closure correction have been added;

· Closure Correction plots and picking can now be done on Logarithmic scales;

· New Poro-Perm crossplots have been added;

· Pc crossplots can have Log Sw values plotted on them;

· Re-sampled Pc curves can be output at user-defined Sw or Pc values;

· Model Function equations are now output in a Petrel-friendly format.

· PC Loader - An option has been added to the Capillary data loader to copy the data directly from excel files. Multiple files and multiple tab sheets within each file can be loaded at the same time. The user can map the cells in the excel file corresponding the cells in the capillary pressure loader. The same mapping can be shared between files and sheets.

· Phi/Sw - The Porosity and Water Saturation Interactive Logplot has had enhancements to several of the crossplots to allow for interactive adjustment of the Clay Shale Ratio (CSR).

· First-Break Processing has been added to the Acoustic Waveform Processing module.

· Mineral Solver - Mineral Dry Weight % and Hydrocarbon-corrected Density, Neutron and Sonic output curves have been added.

· Principle Component Analysis - The output results grid has been expanded to display the individual Eigen Values and Eigen Vectors. New Eigen Vector crossplots have been added.

· Stand-Alone Contingency Table - A new Uncalibrated mode allows you to make a contingency table where the two inputs have different sets of facies ie one input is not calibrated against the other. The table grid will now have dimensions of the facies count in the two curves, so will not necessarily be square.

· Well Map - The Well Map can now load wells using Well List files. Wells are color-coded on the map according to which Well List they belong to.

· CRS - The Coordinate Conversion Tool has been updated to allow conversion of NDIST /EDIST curves.

· Histograms - the Normalisation workflow has been reworked to make it more intuitive.

· Cement Evaluation - Support has been added for several new tools, including the Hunting Titan RIB, the Schlumberger Isolation Scanner and the Baker Hughes Integrity Explorer.

· Image Analysis - Several new image corrections have been added, including Image Deconvolution, Image Filter and Image Flatten. Image Flattening is a technique used to remove the effects of borehole inclination and dipping beds from a borehole image. It is an important first stage in many Image Analysis workflows including Image Calibration and Secondary Porosity calculations.

IP 2019 New Features

· Tilted Parameters - Interactive parameter lines may now be tilted to follow trends in the data.

· Curve AutoEdit - This is a tool to repair bad log data in typical Quad-Combo log data. It uses a series of Multi-Linear Regressions to model each of the input curves as functions of the others. The modeled synthetic curves are then spliced in to replace bad data over areas where the user has flagged the input data as bad.

· Multi-Well Batch Plotting - Allows the setting up of a batch job to output log plots from multiple wells.

· Kingdom Import / Export - IP now supports Importing and Exporting to and from a Kingdom database.

تیم PetroTools آخرین نسخه این نرم افزار را برای شما ارائه می دهد. جهت تهیه نرم افزار با استفاده از منوی خرید با ما در تماس باشید

For buy software, Please contact us via buy menu